27
FIGURE 1 - LO135 MODEL
FIGURE 2 - LO140 MODEL
Specifi c safety instructions for Sheet Sanders:
1.
Do not hold the material to be worked in your hands or put it on your leg, it’s important that the material be
adequately clamped down, reducing the contact with the body and the possibility of losing control of the
equipment;
2.
Never use damaged or incorrect bolts or washers, the ones that come with your tool were specially manu-
factured for it, so that they provide the best performance and guarantee the safe operation of the equipment;
3.
Never plug or unplug the tool from the power outlet if either the plug or the power outlet is wet. First turn off
the circuit (circuit breaker or fuse) that energizes the tool. Then, remove the plug from the power outlet and
check the plug and the power outlet for presence of water;
4.
The use of this tool might create and/or spread dust that may cause serious and permanent respiratory, and
other, injuries. To reduce the exposure to these substances, work in well-ventilated places and always use
dust mask;
5.
Avoid using the tool on surfaces that contain nails or screws, because they might damage the sandpaper or
the equipment; remove them before starting the work;
6.
Keep the power cord away from the tool’s moving parts; keep the cable behind the tool;
Use:
1.
Unplug from the power outlet before performing any kind of adjustment, change of accessory or storing the
tool. These safety measures reduce the risk of accidents;
2.
Do not overload your tool, use it only for the adequate purpose. The correct power tool will do the job in a
better and safer way. Using the power tools for purposes that are different from what is indicated in the
manual might lead to hazardous situations;
3.
Perform maintenance on your SCHULZ power tool. Check if the moving parts are misaligned, bent or broken,
or if they bear any condition that might affect the correct operation of the machine.
In case of fi nding an abnormality that can’t be solved, or if in doubt, have the tool serviced before using it
again. Many accidents are caused by lack of correct maintenance of power tools.
6. APPLICATION
3
2
1
1
2
4
5
4
6
5
3
1.
Handle
;
2.
On/off button
;
3.
Dust outlet pipe
;
4.
Sandpaper clamp lever
;
5.
Base;
6.
Lock-on button for continuous use
.
1.
Handle
;
2.
On/off button
;
3.
Dust outlet pipe
;
4.
Sandpaper clamp lever
;
5.
Base.
