Schulthess topLine pro TA 9340, Руководство по эксплуатации

Страница: 35 / 40

35
The drying target
was not achieved When warm, laundry feels more moist than it actually is!
►
Remove the laundry from the dryer and let it cool.
When still moist:
►
Clean the fluff filter (see
Drying / Cleaning the fluff
filter
).
►
Increase degree of drying (see
Settings / Dryness level
raised
).
►
Clean the moisture sensor (see
Cleaning and Mainte-
nance / Cleaning the moisture sensor
).
The individual laundry
piece does not reach
the set drying target
►
If one single piece is to be dried in the dryer, it will be
dried more evenly by adding additional pieces, e.g. two
terry towels or using the
Express
programme option.
The drying takes
too long
►
Clean the fluff filter (see
Drying / Cleaning the fluff
filter ).
Power failure.
►
Note lock times of EW.
The laundry is not dry
after the maximum
possible settings Drum is overloaded.
►
Observe the maximum loads in the programme table.
Insufficient room ventilation.
►
Open a window or door.
The fluff filter is blocked with fluff or scale deposits.
►
Clean the fluff filter (see
Drying / Cleaning the fluff
filter ).
Laundry gets tangled
►
Select the special programme «Bed linen» or «Terry
towels».
►
Use the
R
programme option
Drum lighting does not
work The LED is defective.
For safety reasons the LED must only be replaced by the
customer service or a qualified specialist.
Dampness in the room
increases significantly The room does not have sufficient ventilation
►
Ensure adequate ventilation.