64
Standby function (ex factory
ON
)
Select «Extended basic settings»!
When the standby function is switched on, the controls
switch off in energy saving mode when no drying pro-
gramme is running. The display will show «ZZZ».
Optical interface (ex factory
OFF
)
Select «Extended basic settings»!
If the optical interface (SCS) is switched on, customer
services can communicate with the machine by PC.
Default language (ex factory
DEUTSCH
)
Select «Extended basic settings»!
If another language is temporarily selected via the
select-language button
or the buttons
and
,
after programme end, in standby mode or after a long
standstill, the setting reverts back to the default
language.
Mains power
400V 2N ~ 3,4kW / 10A
Cleaning and Care
Cleaning the filters
See chapter «Start programme».
Cleaning the filter support
From time to time it is necessary to remove fluffs that
have accumulated inside the filter support. To do so, use
a vacuum cleaner or a cleaning brush.
X
Pull the filters
A
and
B
out of the filter support in the
door opening.
X
Run the pipe of the vacuum cleaner or the brush around
the well of the filter support.
X
Remove any residual fluff.
X
Replace the two filters properly.
X
Close the door.
Cleaning the moisture sensor
After longer operation, small deposits (lime, fabric
refiner) can form on the front inner side of the drum on
both sides of the longish moisture sensors. With
moisture controlled programmes, this can result in the
desired level of dryness not being reached.
Wipe deposits away with a cloth soaked in vinegar.
Содержание Spirit topLine TW 8340
Страница 4: ...4 ...
