Schulthess Spirit topLine 7510, Инструкция по использованию

Страница: 37 / 52

37
Consumption values
The consumption values and programme durations given
are approximate values which were determined under
standard conditions. Fluctuations of up to 10% are possible.
Reduced mains connection
On machines with reduced mains connection, the pro-
gramme times will be extended accordingly.
Hot water supply
In the case of washing machines with a hot water supply,
the following points should be noted:
The max. permissible hot water temperature is 70 ° C.
l
For prewash, delicates programmes and programmes
≤≤
30 °C only cold water is used.
l
In the temperature range
≥≥
40 °C, the water is mixed
automatically to the programmed washing temperature.
l
In the case or textiles soiled with blood or proteins,
select a programme with prewash so that the stains will
be washed out below 30° C to ensure that they cannot
become fixed to the fabric at higher temperatures in the
main washing cycle.
Washing
Preparation
Check that:
u
the pump cover is screwed on.
(see chapter «Cleaning and Maintenance»)
u
the mains plug or the wall switch is turned on.
u
the water tap is turned on.
The machine is ready for use when all pilot lamps are
flashing or are switched off in standby mode.
Opening the loading door
u
Press the «Open door» button.
l
The loading door springs open.
u
Note: The loading door only springs open if the main
power supply is switched on.
Selecting the wash programme
u
Press the programme button.
l
The control light for the selected programme lights up.
l
The display shows the wash temperature, the selected
programme and the wash time.
Selecting additional programmes
u
Press the desired selector button (see chapter «Addi-
tional programmes»).
l
The text for the selected additional programme
appears on the display.
Select additional functions
After selecting the programme, the control light for the
additional functions that can be selected if required will
flash.
u
Press desired function button(s).
(See chapter «Additional Functions»).
l
The control light(s) for the selected function(s) will
light up.
l
The new programme values such as time and spin
speed will be displayed.
Adding laundry
u
Place the laundry loosely in the drum, small and large
pieces mixed together.
Closing the door
u
Close the door by pushing it until the lock audibly
engages.
u
Ensure that no items of laundry are trapped between
the door and the rubber seal.
If the door is not closed, a safety switch prevents the
machine from starting.
Adding the detergent
Dose the detergent according to the chapter «Detergent
drawer»
Close the detergent drawer carefully after dosing until
you feel it look.
u
Risk of water damage!