56
FOAM AND LEAKAGE
Some foam can be
seen at the
programme end
Some detergents tend to produce more foam, which does
not affect the rinse results.
Too much foam visible
during washing
Foam fills the entire
drum
Too much detergent was used.
►
Mix approx. 20 ml conditioner and approx. ½ litre water.
►
Add the conditioner-water mixture into
compartment
of the detergent drawer. Repeat procedure, if necessary.
►
Reduce detergent dose in the future.
Foam leaks from
the detergent drawer
during washing,
rinsing or spinning
Too much detergent was used.
►
Stop the programme by pressing button
Cancel
.
There are two possibilities to solve the problem:
Option A
►
Stop the programme by pressing button
Cancel
.
►
Mix approx. 30 ml conditioner and approx. 1 litre water.
►
Start the previously selected wash programme (it may take
several minutes until the machine is released for the selec-
tion of a new programme).
►
At the end of the water inlet, switch immediately forward to
Finishing rinse
by pressing
Forward
.
►
Add the conditioner-water mixture into
compartment
of the detergent drawer.
The programme should now end as usually and the spinning
process should take place.
►
Afterwards repeat the wash programme, however without
any detergent.
Option B
►
Wait for approx. 1 hour.
Then press button
and switch immediately forward to
Spin
by pressing
Forward
. Usually the laundry will be spun
and the programme finishes as usual.
►
Repeat the wash programme, however without any detergent.
►
Reduce detergent dose in the future.
►
If required use washing powder instead of liquid detergent.
