Schulthess 7297.1, Инструкция по использованию, Страница: 59 / 68

Starting the programme
Selecting programmes
See chapter «Selecting programmes»
Selecting additional functions
See chapter «Additional functions»
Changing a programme before the start
u
Press the desired programme button again.
l
All control lights for the available additional functions
flash again and all settings are deleted.
u
Select any additional functions.
Add laundry
Before adding laundry, ensure that there are no foreign
bodies or even trapped pets in the drum.
Only dry fabrics which have been washed with water in
the dryer.
Laundry which has been treated with flammable solvents
e.g. stain remover or white spirits, should not be dried in
the dryer (Risk of explosion!).
Fabrics which contain foam rubber or which have hair
spray, nail polish remover or similar substances on them
should not be dried in the machine (fire risk!).
u
Place the laundry loosely in the drum, mixing large and
small items
Start programme
u
Press the start button.
l
The control light is illuminated and the programme
starts automatically.
If the child lock is activated:
u
Hold the start button down and press the fast forward
button.
Programme progress / Programme status
With the moisture controlled programmes the dampness
of the laundry is continually monitored by an electronic
sampling system.
u
The programme time remaining is displayed.
This remaining time is recalculated several times during
drying, so the effective programme end will therefore
vary by a few minutes.
u
For time programmes, the time remaining to the end
of the programme is displayed.
Towards the middle and the end of a programme the
message «Cleaning in progress» is displayed.
As long as this message is displayed, you must not pull
out the condensed water container!
Adding more laundry
This is possible at any time.
u
Press the door open button.
l
Wait for the drum to stop.
u
Add your laundry.
u
Close the door again.
u
Press the start button.
If the child lock is activated:
u
Hold down the start and fast forward buttons at the
same time.
u
The drying process is continued.
Interrupting the programme
u
Interrupt the programme by pressing the fast forward
button repeatedly, until «programme end» appears on
the display.
If the child lock is activated:
u
Hold the start button down.
u
Simultaneously tip the fast gear key.
Programme end
The programme end is indicated by the display value
00:00h, the display of «Programme End» as well as a
flashing control light.
l
An audible signal.
(only if summer function is switched on)
l
The drum continues to rotate periodically after the pro-
gramme has ended to prevent the laundry from creasing
(only if crease protection has been switched on, for 30 or
60 minutes).
The washing should be taken out now at the latest.
59