Schulter Systems DH E RS D/BW Скачать руководство пользователя страница 24

Страница: 24 / 24

CLAIMS ON THIS LIMITED WARRANTY:

To make a claim under

this Limited Warranty, the Owner must provide Schluter

-Systems

with written notice within 30 days of any alleged defect in the Product

covered by this Limited Warranty, together with date and proof of

purchase of the Product, and name and address of all installers, failing

which this Limited Warranty shall be of no legal effect. Schluter

Systems reserves the right at its election and as a condition of this

Limited Warranty to inspect the alleged defective Product.

All U.S. claims shall be sent to:

Schluter Systems L.P.

Attn: Warranty Claims Dept.

194 Pleasant Ridge Road

Plattsburgh, NY 12901

All Canadian claims shall be sent to:

Schluter Systems (Canada), Inc.

Attn: Warranty Claims Dept.

21100 chemin Ste-Marie

Ste-Anne-de-Bellevue, QC H9X 3Y8

*For the purpose of this warranty

Schluter Systems, L.P.

shall

provide the warranty for all products for end users located in the

United States, and

Schluter Systems (Canada) Inc.

shall provide the

warranty for all products for end users located in Canada. This warranty

is limited to sales of the Products made in and intended for use in the

United States and Canada.

**Schluter

-DITRA-HEAT Thermostat (“the Product”): The product is

defined to be the Programmable (DH E RS D/BW) Thermostat and/or the

Non-Programmable (DH E RS /BW) Thermostat.

Schluter Systems L.P.

194 Pleasant Ridge Road, Plattsburgh, NY 12901-5841

Tel.: 800-472-4588 • Fax: 800-477-9783

Schluter Systems (Canada) Inc.

21100 chemin Ste-Marie, Ste-Anne-de-Bellevue, QC H9X 3Y8

Tel.: 800-667-8746 • Fax: 877-667-2410

www.schluter.com

Содержание DH E RS D/BW

























Результаты поиска

Содержание DH E RS D/BW

Отзывы:

Похожие инструкции для DH E RS D/BW

Бренды по названию

Популярные бренды

Schulter Systems DH E RS D/BW, Руководство пользователя

Результаты поиска

Содержание DH E RS D/BW

Отзывы:

Похожие инструкции для DH E RS D/BW

Бренды по названию

Популярные бренды