Schulte SMR-600 Скачать руководство пользователя страница 39

Страница: 39 / 76

ASSEMBLY

SMR-600 04/21

Assembly Section 3-7

PRE-DELIVERY CUSTOMER CHECKLIST

Lubricate all grease fittings. Refer to the grease schedule in this manual.
Check that all nuts and bolts are in place and properly tightened. Refer to the

Maintenance

Section

of this manual for required bolt grades and torques.

Check that all tires are inflated to proper specifications. Refer to the

Maintenance Section

of this manual for required tire pressures.



Are the Tires clear of the Mainframe, even when turning during axle articulation?



Are all hoses tight and do not leak?



Are all decals in place? See manual for decal description and placement.



Are all bolts tight?



Have all hoses been properly routed so that hoses do not kink or bind when windrower is articulated

through all motions?



Is machine equipped with proper operator protection?



Is drum rotation correct?



Does implement operate smoothly at normal operating speed? Implement should not vibrate excessively.



Is the chain properly tensioned with washers flush with spacers?

Содержание SMR-600













































































Результаты поиска

Содержание SMR-600

Отзывы:

Бренды по названию

Популярные бренды

Schulte SMR-600, Руководство оператора

Результаты поиска

Содержание SMR-600

Отзывы:

Бренды по названию

Популярные бренды