Schulte FX-310 Скачать руководство пользователя страница 122

Страница: 122 / 176

MAINTENANCE

FX-315/FX-310 03/21

Maintenance Section 5-4

PARTS INFORMATION

Before operating your Rotary Cutter, make sure it is properly lubricated and thoroughly inspected. Only a

minimum of time and effort is required to regularly lubricate and maintain this machine to provide long life and

trouble free operation.

Always disengage the PTO before raising the Rotary Cutter for transporting or making

adjustments.

NOTE:

Some guards and shields have been removed from the illustrations and pictures for instructional clarity.

DO NOT operate implement without all shields and guards in place and in good condition.

Lubrication

Grease points around the cutter will be identified by one of the following greasing decals. In some cases,

multiple grease points may be identified by a single decal if they are close together and the require the same

greasing schedule.

PARTS INFORMATION

Schulte Products use balanced and matched system components for blade carriers, blades, cuttershafts,

knives, knife hangers, rollers, drivetrain components, and bearings. These parts are made and tested to

Schulte Industry specifications. Non-genuine "will fit" parts do not consistently meet these specifications. The

use of “will fit” parts may reduce the performance, void Schulte warranties, and present a safety hazard. Use

genuine Schulte parts for economy and safety.

(SPSI-1)

SEE YOUR SCHULTE DEALER

Содержание FX-310

















































































































































































Результаты поиска

Содержание FX-310

Отзывы:

Похожие инструкции для FX-310

Бренды по названию

Популярные бренды

Schulte FX-310, Руководство оператора

Результаты поиска

Содержание FX-310

Отзывы:

Похожие инструкции для FX-310

Бренды по названию

Популярные бренды