SCHULTE Classica Installation Training
Page 68
Radius Corner Shelf
With Hanging Rod
1.
Measure desired height for hanging rod and make
a pencil mark on the wall where the panel will be
attached.
•
42” from floor for short hang
•
68” from floor for long hang
2.
Temporarily attach a 5-½” (an 11” Panel cut in
half) vertical panel to the cabinet panel just above
the 42” or 68” pencil mark.
3.
Position a level along the back wall, flush with the
top of the 5-½” panel, and make a pencil mark in
the corner.
4.
Remove the temporarily installed 5-½” panel
from cabinet.
5.
Mount the 5-½” vertical panel on the wall that
will be receiving the rod, with the top of the panel
flush with the pencil mark.
•
If anchoring the panel to a wooded stud, secure
the panel to the wall with a Melamine Screw
through one of the predrilled holes.
•
If a wood stud is found, secure the panel to the
wall with a Melamine Anchor. Use the third holes
from top and bottom.
•
Avoid placing the screws through holes that will
be needed for shelf pins and rod flange.
(1)
(2-5)
