Follow the below steps to install the heater
Step 1
:put 4 Explosive bolt M6*50
①
into the wall.
Step 2:
Take off the nuts, the spring locks washers and the plain washers
from four explosive bolts. Keep them for the next step.
Step3:
Installer the heater on the wall
Installation to tube
Product support from the ceiling should be no less than 10cm;
Warm distance from the wall should be not less than 10cm;
Far from inflammable, explosive;
Any object that is directly covered by the product is prohibited;
Make sure that the irradiation distance is not less than 50cm;
Children are prohibited from using without a guardian;
Prohibited toward ceiling or wall;
No direct touch to the heating zone and its outer shell;
