INSTALLATION ON A CEMENT CEILING
Mounting the fan components:
1- Choosing the fan height:
Two downrods are included (short 15 cm and long 25 cm). The short downrod will already be pre-
assembled to the anti-wobble bracket. This gives a total height of 45 cm to the fan once mounted.
If you want the fan to hang lower (55 cm), you must replace the short downrod with the long one.
To do this you will need to remove the anti-wobble bracket, along with the mounting screws and pins from
the short downrod and place them in the same position on the long downrod.
2- Connecting the downrod to the fan body (motor)
- Remove the lower pin from the downrod and slide up the canopy and decorative trim cover as per the
diagram.
- Feed the cables from the body (motor) through the inside of the downrod, until they come out the opposite
end (ceiling bracket). Insert the downrod into the union ring and fix in place using the pin and the R clip and
ensure it is secured in place using the locking screws. Ensure they are screwed in proportionally on both
sides. Cover with the decorative trim cover.
