09
3. Settings.
Settings and adjustments to the product or accessories may only be made
by people who have been given the necessary instructions by a medical
product advisor. Please ensure that none of the user's extremities are in
the respective area when making adjustments of any kind to minimise the
risk of injury.
3.1 Locking / unlocking the castors
The sub-frame should always be pre-
vented from rolling away inadvertently
by locking the two rear castors (
A
).
3.2 Seat height
fridolin 1.
: To adjust the seat height,
undo the screws of the clamps (
B
) on
the uprights and put the seat pan
into the desired position. The height
of the gas pressure spring must then
be adjusted. To this end, undo the
two screws (
C
) in the centre between
the two uprights and adjust the gas
pressure spring to the required height.
Firmly tighten all screws again. If the
seat height is adjusted in height over
5 cm, the mounting plate for the gas
pressure spring must be turned. To this
end, remove and install the screws (
C
)
in the centre between the two uprights
and the screw connection for the gas
pressure spring (
D
). Firmly tighten all
screws.
A
B
C
D
