12
3. Settings.
3.5 Central locking brake
The new locking brake provides secure
protection against rolling away, and
can be operated personally by the
user. To this end, the lever (
A
) of the lo-
cking brake must be pulled upwards.
When the brake is released, it points
downwards. The brake is tightened if
the lever (
A
) is pointing upwards.
3.6 Foot support
For
fridolin 1. & fridolin 2.
there are
different foot support variants that are
mounted at the support head. After
the respective foot support has been
plugged into the support head (
B
) and
after the depth has been adjusted,
the knee angle can be adjusted using
the two clamping levers (
C
).
3.7 Push bar handling
The push bar makes it easier to relocate
the room frame, and can be adjusted
in depth and angle. The angle is ad-
justed by releasing the quick-release
clamp (
D
) on both sides. Then bring the
push bar into the correct position and
tighten the quick-release clamps (
D
)
again. The depth is adjusted by loo-
sening the grub screws (
E
) on the right
and left-hand side below the adapter.
The release lever (
F
) for the seat angle
adjustment can also be mounted on
the push bar / handle or on the back
of the seat pan if used later.
A
B
B
C
C
D
E
F
