15
5. Preparation of the momo tricycle.
5.1 Mounting the axle extension
Unscrew and remove the wheel nuts (
A
),
leaving the washer on the axle, and
screw on the axle extensions (
B
).
Ensure that the failure protection is
engaged in the appropriate aperture,
and is then firmly tightened (to the
torque stated by the bicycle manu-
facturer).
After this, the wheel should be in the
centre. This means that the distance
between the rim and the fork tube
must be the same on both sides. The
axle extensions (
B
) also take over the
function of the wheel nuts (
A
). There-
fore, regularly check the axle extensi-
ons (
B
) for tight fit, best of all prior to
each journey.
5.2 Attaching the adapter clamp on
the tricycle down tube
The clamp (
C
) must be attached
onto the down tube, below the pe-
daling unit of the tricycle. Do not yet
tighten the adapter clamp (
C
). You
can do this after you have adjusted
the clamping plate to the size of the
tricycle (see
Point 6.1
).
A
B
B
C
