manualshive.com logo in svg

Schuchmann Dynamic Pacer, Инструкция по эксплуатации

Поделиться
Скачать
Schuchmann Dynamic Pacer Скачать руководство пользователя страница 29

20

5. Use.

Leaned forwards

The figure shows that the user is tilted further 
forwards than in the standard position. Here 
please observe the angle of the torso support 
and that the hip fixation aid is mounted be-
hind the shoulder area of the user. Here the hip 
fixation aid is mounted on the torso support. 
The brakes of the castors are tightened.

1. In order to adjust the tilt of the user for-

wards:

•  Adjust the angle of the torso support (see 

Point 4.7

).

2. Adjust the hip or pelvic fixation:

•  Adjust the push handles in height (see 

Point 4.3

).

•   Adjust the belts on the hip or pelvic fixation so that the user‘s pelvis is tilted

 

  forwards slightly and is adjusted in relation to the torso support (see 

Points  

  4.8 and 4.10

).

3. Adjust the grip rings and / or arm supports

•  Adjust  the  height,  the  width  and  the  angle  of  the  grip  rings  and  arm

 

  supports (see

 Points 4.4 and 4.6

).

4. Adjust the upper thigh / pelvic fixation

•  Adjust the upper thigh and pelvic fixation and the straps in order to adjust

 

  the inside leg length for the user (see

 Points 4.10 and 4.11

).

•  The  upper  thigh  fixation  is  important  in  order  to  adjust  the  distance 

 

  betweenthe upper thighs. It also prevents rotation of the user in the  
  Dynamic Pacer

5. Adjust the ankle fixation

•  Adjust the straps and the clips on the ankle fixation in order to adjust the

 

  inside leg length for the user (see 

Point 4.12

).

6. Adjust the position and the angle of the table (see Point 4.13).

7. Release the brakes on the castors (see Point 3.3).

Position the user into the dynamic pacer. so that the centre of gravity

lies between the castors.

Use the appropriate accessories to prevent the user‘s feet from catching

Do not mount the armrests, arm supports and grip rings at the foremost

end of the top frame!

To avoid crush injuries and pressure sores, do not place the torso

support precisely under the user‘s armpits!

Содержание Dynamic Pacer





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды