10
4. Accessories.
4.7 Torso support
Mount the torso support (
A
) directly
behind the oval crossbar on the top
frame. A safety loop is mounted on the
front side of the torso support (
A
). The
torso support can simply be opened
and closed through plug locks.
To adjust the width:
• Position the adaptor clamp (
B
) with
the torso support (
A
) in any position
on the top frame.
• Loosen the wing screws (
C
) and
bring the torso support (
A
) into the
required position.
In order to turn the torso support (A):
• Completely unscrew the wing
screws (
C
).
• Turn the torso support (
A
) in the
required position.
• Mount the wing screws again (
C
)
and tighten them.
In order to adjust the height of the torso support (A):
• Press the buttons (
E
), bring the torso support (
A
) into the required height
and let go of the buttons (
E
) again.
• An audible clicking noise is heard when the adaptors have engaged.
In order to reposition or remove the entire torso support (A):
• Loosen the adaptor clamps (
B
).
• Push the torso support (
A
) backwards or forwards.
• In order to remove the adaptor clamps (
B
) including the torso support
(
A
), see
Point 4.2.
The straps (
F
) can be adapted independently of one another in order to tigh-
ten the torso support (
A
) or to loosen it. In addition, the tilt angle of the user
can thus be adjusted. The torso support (
A
) can be opened both at the front
and to the rear. In this way, anterior or posterior utilisation are facilitated.
Position the user in the Dynamic Pacer so that the user‘s centre of
gravity lies between the castors.
Then firmly re-tighten the screws again after each setting/adjustment!
A
E
F
C
D
B
B
Содержание Dynamic Pacer
Страница 1: ...Instructions for use dynamic pacer The dynamic walking aid dynamic pacer ...
Страница 2: ......
Страница 36: ...schuchmann de ...
