background image

  Warning:

 Any helmet that has been subjected to a violent 

impact should be replaced!

 Your helmet is designed to distribute the force incurred 

during an impact over a wide area. Even if your helmet looks 
visibly undamaged, its useful life has come to an end after 
only one impact during riding, i.e. an accident where you 
and your helmet hit the ground or an object. In an impact, 
the helmet’s impact absorbing liner becomes compacted. 
Once this has happened, the helmet no longer has the ability 
to absorb further impacts. Your helmet may look the same, 
but it will not provide protection in an accident. Therefore, a 
helmet that has experienced an impact should be destroyed 
and replaced.

  Warning:

 After your helmet has protected you from an impact 

or suffered a hit, you must get a new one!

 Your helmet is designed to distribute the force incurred 

during an impact over a wide area. Even if your helmet looks 
visibly undamaged, its useful life has come to an end after 
only one impact during riding, i.e. an accident where you 
and your helmet hit the ground or an object. In an impact, 
the helmet’s impact absorbing liner becomes compacted. 
Once this has happened, the helmet no longer has the ability 
to absorb further impacts. Your helmet may look the same, 
but it will not provide protection in an accident. Therefore, a 
helmet that has experienced an impact should be destroyed 
and replaced.

  Warning:

 

Don’t ride with an open Face Shield! 

 

Riding without the Face Shield or with an open Face Shield 
can result in injury to the eyes and face from stones, dust, 
insects and other flying objects. The sun visor, when lowered, 
will offer a certain amount of protection from light impact 
from stones or insects but does not provide protection against 
all hazards.

  Warning:

 

No helmet is as safe as riding safely!

  

Motorcycle riding has special personal hazards. The risks that 
are being taken by riding a motorcycle can be reduced but 
not eliminated by wearing a helmet. 

  Warning:

 

No helmet can protect the wearer against all 

foreseeable impacts!

  

There are limits to the physical size and weight of the helmet 
a person is willing to wear. The ability of a helmet to protect 
the wearer is limited. No helmet can protect the wearer 
against all foreseeable impacts.

  Warning:

 Use only a helmet that fits snugly all around your 

head! 

Fasten the chin strap securely under your chin! A helmet  
can provide protection only to the extent that your head 
is covered with the helmet. The use of a properly fitted, 
securely fastened helmet can lessen the risk of death or 
permanent impairment due to head injury.  
For maximum head protection, the helmet must be properly 
fitted and should provide adequate peripheral vision. The  
retention system must be securely fastened under the chin. 
Failure to have a proper fit and to securely fasten the helmet 
is dangerous as the helmet could come off in an accident 
resulting in severe head injury or death. For detailed 
information regarding proper fit, see section D.

  Warning:

 

Never use the helmet with the lining removed!

  

If the lining is not installed before use, the helmet may not 
fit properly and could come off in an accident, resulting in 
severe head injury or death.

C. rEAD FIrST

Содержание C3 PRO























































Отзывы: