SC10U
43
English
17.3 Fault Reset
When the SC10U is not working properly or is in faulty status for any
reason, you may reset by pushing the pin-hole reset button as shown
in the picture below. Insert a paper clip into the reset pin-hole and
press the reset button for a second with light pressure. The SC10U will
be switched off. Restart the system and try again. This will not restore
the headset to factory default settings.
17.4 Factory Reset
If you want to restore the headset to factory default settings, use the
Factory Reset in the configuration menu. The headset automatically
restores the default settings and turns off. Please refer to
section
14.17, “Factory Reset” for more details.
18 QUICK OPERATION REFERENCE
Type
Function
Button Command
LED
Beep
Basic
Function
Power on
Press the (+) Button and the
(-) Button for 1 second
Solid blue
Ascending
beeps
Power off
Press the (+) Button and the
(-) Button for 1 second
Solid red
Descending
beeps
Volume adjustment
Tap the (+) Button or the (-)
Button
-
-
Mobile
Phone
Answer mobile
phone call
Tap the (+) Button
-
-
End mobile phone
call
Press the (+) Button for
2 seconds
-
-
Voice dial
Press the (+) Button for
3 seconds
-
-
Speed dial
Press the (+) Button for
5 seconds
-
Mid-tone
single beep
Reject incoming
call
Press the (+) Button for
2 seconds
-
-