PAGE 4/5
INSTRUCTION SHEET: HSMPE_E / 02-2015
Errors and omissions excepted.
SCHRACK TECHNIK GMBH
Seybelgasse 13, A - 1230 Vienna,
PHONE
+43 1/866 85-0
INTERNET
www.schrack.com
W
INITIAL OPERATION
W
DISPLAY
The following values can be read from
the display.
Display Overview
1
2
3
4
5
6
1.
kW - Power measurement
Electrical output of all connected devices taking
into account the phase shift.
2.
Hz - Frequency
Current power frequency.
3.
kWh - Kilowatt-hour
Records the power consumed by all connected
devices. The counter reading is stored and can
be reset to zero using the Reset button.
4.
V - Power supply voltage
Current voltage of the power supply.
5.
Phase angle
Displays the phase shift in the power supply.
6.
A - Amps
Current drawn at the present time by all con-
nected devices.
The display (arrow) is situated on the front of the
power strip.
7KHYDOXHVVKRZQLQWKHGLVSOD\IXO¿OO$FFXUDF\
class 1.
Insert the power strip's plug into the power socket.
Press button (1) to activate the display (arrow).
The display will turn of again after 30 seconds.
Now you may plug your equipment into the power
strip.
For voltage and current consumption... see Technical
Data.
Before interrupting the power supply to your equip-
ment, make certain that the equipment has been
correctly switched off.
