PAGE 2/5
INSTRUCTION SHEET: HSMPE_E / 02-2015
Errors and omissions excepted.
SCHRACK TECHNIK GMBH
Seybelgasse 13, A - 1230 Vienna,
PHONE
+43 1/866 85-0
INTERNET
www.schrack.com
W
SAFETY INFORMATION
Use only in indoor, well ventilated and dry areas.
Never use the power strip immediately after bringing it into a warm room from a cold one.
The condensation this creates can, in some cases, cause a shortcircuit and destroy the product.
It also presents a fatal electrocution hazard!
The power cable of the power strip must be neither repaired nor replaced. If the power cable is damaged, the
power strip must be replaced.
Ensure when selecting the installation site that no high humidity, high temperatures (see Technical Data),
PRLVWXUHVROYHQWVÀDPPDEOHJDVHVGXVWRUYDSRUVDUHSUHVHQW 7KHKHDWJHQHUDWHGGXULQJRSHUDWLRQPXVW
be dissipated.
The power strip may be operated only when connected to power socket protected by a 16A fuse. Do not ex-
ceed the maximum power transmission (see Technical Data). If the power strip shows outward signs of wear
from transport or improper handling, it must not be put into operation or must be put out of operation immedi-
ately and must be replaced or sent back to the manufacturer for repair.
Danger of fatal electric shock:
Never carry out work on the power strip with wet hands.
5LVNRI¿QJHUFUXVKLQJGXULQJLQVWDOODWLRQRUPRXQWLQJZRUN
is a maintenance-free system.
There is no need to open the housing during installation.
Do not use aggressive substances such as spirits or acids to clean the unit, as these can damage it.
To clean the housing use a slightly moistened cloth.
Observing these notices is part of our terms of warranty.
7KHSURGXFWIXO¿OOVWKHUHTXLUHPHQWVRIWKHYDOLG(XURSHDQDQGQDWLRQDOGLUHFWLYHVDQGVWDQGDUGV
7KH&(FRQIRUPLW\KDVEHHQGRFXPHQWHGDQGWKHFRUUHVSRQGLQJFHUWL¿FDWHVDUHRQ¿OHDWWKH
manufacturer's location.
This
W
INTENDED USE
The power strip is intended solely for the common connection of different electrical devices in power consumption of
the connected equipment for consumption monitoring purposes.
Uses other than that specified above are not permitted and may lead to damage to the power strip. No modification
may be made to any part of the power strip. Any such modification forfeits all warranty liability.
