ENG
Instruction Manual for
DOWNUNDER OUT TCD
1. Use as directed:
This product serves exclusively lighting purposes and may:
only be used with a voltage of
230V ~50Hz
.
not be exposed to strong mechanical loads or to strong
contamination.
only be installed and operated after a condition inspection if the
product is dirty or has been moistened through storage.
not be modified or converted.
If these points named above are not adhered to, a short circuit or
electrical shock may occur!
2. Technical Data:
Operating voltage:
230V ~50Hz
Safety class:
I
Safety type:
IP 44
Bulb:
TC-D,
G24d-3,
26W
Dimensions (W/H/D):
24,5/26/10 cm
Recess dim.:
see fig.
Weight: 3,1kg
Importeur:
SLV
Elektronik
GmbH
IP 44
: Protection against foreign objects > Ø 1,0mm - Protection against
splashing water from all directions.
3. Installation
The electric connection may be executed only by an electric expert
who is familiar with the valid directives!
Attention: Switch off the power of the mains supply line or
respectively of the connection lead before doing any works!
Use only
parts, which belong to the product! Otherwise the product or the installation
might not be sufficiently safe.
Installation place:
The product is intended for installation in solid walls. It may be installed in
brickwork as well in concrete walls.
Fig. a)
Installation in a plastered wall(Recess depth 10cm – thickness of
plaster
Fig. b)
Installation in a brick wall
Fig. c)
Installation by casting-in the installation box.
Make sure that the product is mounted on a stable, even and tilt-fixed
background.
Separate installation steps
Remove the front cover and take off the installation box (1).
-
-----------------------------------------------------------------------------------
Brick wall
: Direct the mains lead into the installation box (2). Insert the
installation box into the recess (3). Fix it by adequate means (i.e. by
mounting foam)
Concrete wall
:
Type A:
Direct the mains lead into the installation box
(2). Fix the installation box by adequate means on the formwork. Ensure
that the installation box is tight and no liquids get into the installation box
when pouring the wall.
Type B
: Prepare an opening before pouring the
wall (using styrofoam block). Direct the mains lead into the installation
box when the wall is hardened out (2). Insert the installation box into the
opening (3). Fix it by adequate means (i.e. by mounting foam)
-
-----------------------------------------------------------------------------------
Direct the mains lead through the gasket into the fixture (4).
Electrical Connection (5)
The product must be able to be separated by an all pole separation from
the current supply.
Equip the three wire ends with protective tubes.
For electric connection attach the black or brown wire (live conductor) of
the mains lead with the
clamp L
and the blue wire (neutral conductor) of
the mains lead with the
clamp N
. The green-yellow wire (protective
conductor) of the mains lead has to be tightly screwed into the
earth
clamp
of the product.
Insert the fixture into the installation box (6). Fix it with the supplied
screws.
Inserting the bulb (7)
: Touch energy-saving-lamps on the plastic
housing, not on the bulb glass. Stick the bulb into the socket.
Put the cover back on (8). Note the right fit of the gasket.
Pay attention that the product is securely fixed!
The product is now ready for operation.
4. Operation
:
Information for the user:
Operate the product only if it is working correctly. Switch off the product
with a malfunction immediately and operate it again only after examination
by an electrical specialist. This is the case, when:
visible damages appear.
the product does not work.
smoke, steam or crackling sounds appear.
an overheating is recognisable.
Repairs of the product or work on mains voltage-prominent sections may
only be carried out by qualified electricians.
Attention:
Here exists mortal danger from an electric shock!
How to avoid failure and fire risk:
Do not cover the product - provide free air circulation!
Do not hang or fasten anything on the product, especially no decoration.
Replace damaged protection glasses immediately!
Never let children play unsupervised with electric products! Children
can not always estimate dangers in dealing with electric energy correctly.
The following enviromental influences may have unwanted effects on
the surface of the product:
acid rain and sour soil
high salt content in the air
thawing salt
cleaning agents
other chemical substances (e.g. herbicides)
Protect the product by adequate means to avoid unwanted changes of the
surface.
Cleaning tip
: Switch off power! Clean the product with a damp
cloth.
5
2
4
7
8
3
1
a
x
b
c
6
6
B:24/ H:25/ T:10 - x
B:24/ H:25/ T:10
5
2
4
7
8
3
1
a
x
b
c
6
6
B:24/ H:25/ T:10 - x
B:24/ H:25/ T:10
L
N
What is to do if a bulb is defect or does not work?
Disconnect the product from power
, before you exchange the bulbs.
Caution:
Let the
bulb cool down
first before replacement –
otherwise considerable risk of injury exists because of the hot surface.
Replace the bulbs only with bulbs of the same data like socket, power
and capacity. Every other sort of bulb can lead to damages of the light.
Replacing the bulb
: see Installation.
5. What else has to be considered?
Disconnect the product from power
, before you…
clean or maintain the product.
do any works on the product or its components (electric expert).
230424 01/2006
by SLV Elektronik GmbH
Technical Details are subject to change.
Duplication prohibited !
F
Mode d'emploi pour
DOWNUNDER OUT TCD
1. A utiliser comme indiqué :
Ce produit ne sert qu’à éclairer:
il est prévu pour une tension de
230V ~50Hz.
il ne doit être soumis ni aux efforts mécaniques importants ni à
un encrassement important.
il ne doit être utilisé qu’après examen si le produit a été stocké
dans un entrepôt humide ou sale.
il ne doit pas être modifié.
Un non-respect de ces points peut causer un court-circuit ou une
décharge électrique!
2. Informations techniques:
Tension d'alimentation:
230V ~50Hz
Classe de protection:
I
Degré de protecion:
IP 44
Ampoule:
TC-D, G24d-3, 26W
Dimensions (L/H/P):
24,5/26/10 cm
Mesures d’installation
voir fig.
Poids: 3,1
kg
Importeur:
SLV
Elektronik
GmbH
IP 44: Protection contre les corps étrangers durs > Ø 1,0 mm - Protection
contre les éclaboussures provenant de toutes les direction.
3. Installation
La connection électrique doit être exécutée par un professionnel,
lequel est familier des normes en vigueur!
