Schonstedt SPOT, Инструкция по эксплуатации

Страница: 7 / 24

Page | 7
Operating Controls
The controls on SPOT are designed to be intuitive and require minimal training for
effective use. The locator can easily be operated with one hand.
Figure 2: SPOT® Membrane Switch
ON/OFF: Push this button to turn the unit on or off. Upon turn ON , the unit emits 1
short beep indicating that the gain setting is #1 (1=Extra Low, the default setting on
power up).
Volume: Upon turn ON , the volume defaults to HIGH. Pushing this button changes
the volume to MEDIUM. Additional pushes of this button toggle the volume between
HIGH and MEDIUM.
Gain: The sensitivity of the unit can be increased (to detect smaller objects at
greater depths) or decreased (to detect larger objects at shallower depths) by
adjusting the gain. The sensitivity mirrors that of the GA-52Cx: 1=Extra Low, 2=Low,
3=Medium, 4=High and 5=Extra High. Each time the gain is changed, the unit emits
a number of short beeps equal to the gain setting (i.e. one beep for gain #1, two
beeps for gain #2, and so on).
Vo lum e
O N/ O FF
G a in