Schonstedt SPOT, Инструкция по эксплуатации

Страница: 14 / 24

Page | 14
Locating and Tracing Barbed Wire
You can often trace barbed wire (from old fence lines) buried just beneath the surface. Even
if the wire is only a trail of rust, it can still be detected near the surface. Tip the locator a little
lower than usual (but not parallel with the ground).
First, examine trees for bench marks and bits of embedded barbed wire. Then, hold the
locator parallel with the direction of the wire.
Figure 13: Tracing Barbed Wire from Old Fence Lines
Searching Areas along a Chain Link Fence
Searching in the vicinity of a chain link fence requires a reduced sensitivity setting and some
control over the orientation of the locator. As illustrated in Figure 14, position the locator
horizontally with its long axis perpendicular to the fence. This ensures that the upper sensor
is kept away from the fence.
Figure 14: Searching in the Vicinity of a Chain Link Fence