Gas Hob Operating Instructions
Page 10 of 11
Maintenance and care
Switching the appliance off
Disconnect your appliance from the electricity
supply before carrying out any work on it.
Cleaning the appliance
! Do not use abrasive or corrosive detergents such
as stain removers, anti-rust products, powder
detergents or sponges with abrasive surfaces:
these may scratch the surface beyond repair.
! Never use steam cleaners or pressure cleaners
on the appliance.
•
It is usually enough to wash the hob with
a damp sponge and dry it with absorbent
kitchen roll.
•
The removable parts of the burners
should be washed frequently with warm
water and soap and any burnt-on
substances removed.
•
For hobs which light automatically, the
terminal part of the electronic instant
lighting devices should be cleaned
frequently and the gas outlet holes
should be checked for blockages.
•
Stainless steel can be marked by hard
water that has been left on the surface for
a long time, or by aggressive detergents
containing phosphorus. After cleaning,
rinse and dry any remaining drops of
water.
Gas tap maintenance
Over time, the taps may become jammed or
difficult to turn. If this happens, the tap must be
replaced.
! This procedure must be performed by a qualified
technician authorised by the manufacturer.
