Setting a cooking programme
with delayed start
Changing cooking temperature
It is only possible to adjust the cooking temperature in
creation mode.
Press the °C button.
Adjust by pressing the + or – buttons.
Save your selection by pressing
OK
.
Changing the cooking time
During cooking, you can change the cooking time by
pressing
and the + or – buttons.
Save your selection by pressing OK.
Press
START
to start cooking.
Cancelling cooking in progress
You can stop the cooking at any time by pressing the
START/ STOP
button (press and hold for approximately
one second).
If steam generation has not yet begun (approximately one
minute), the oven stops immediately and the time display
disappears.
If steam generation has already begun, the time converts
to 3 minutes, a countdown begins and the steam escapes
before the door is opened.
Setting a cooking programme with
delayed start
Set the desired cooking mode, the time and adjust the
temperature if necessary,
Example: position Creation > Steam Cooking
Temperature 85°C.
Press the
button and select the duration using the
– and + buttons, for example 30 mins.
For example, it is 12:30.
You have programmed a cooking cycle for 30 mins.
The displayed end of cooking time is 13:00.
Using the
buttons, select End of cooking, the end
of cooking time is displayed.
Adjust the end time by pressing the – and + buttons.
Example 14:00
Validate by pressing
OK
and
START
to run the
programme.
After these steps, the oven heating is delayed so that
cooking ends at 14:00.
When the cooking cycle is finished, a series of beeps is
emitted for several minutes
You can stop the beeps by pressing the
START/STOP
button for one second.
You MUST empty the tank.
In order to guarantee good oven reliability,
the fan continues to function for a short
period after cooking is complete.
At the end of cooking
In the event of a water circuit-related problem during cooking, the
“no water” indicator appears, a beep is emitted and a “Fill your
water tank” message appears in
the display.
This error is specifically associated with:
- an empty tank.
- a poorly seated tank.
After checking these two points, close the door and press
START
- the oven restarts.
Water management
11
GB