SCHOLTES SOTF1510B, Руководство пользователя

Страница: 35 / 131

13
The glass is being
scratched.
Rough-edged
cookware.
Unsuitable, abrasive
scourer or cleaning
products being used.
Use cookware with flat and
smooth bases. See ‘Choosing the
right cookware’.
Some pans make
crackling or clicking
noises.
This may be caused
by the construction of
your cookware (layers
of different metals
vibrating differently).
This is normal for cookware and
does not indicate a fault.
The induction hob
makes a low humming
noise when used on
This is caused by the
technology of induction
cooking.
This is normal, but the noise
should quieten down or
disappear completely when you
decrease the heat setting.
Fan noise coming
from the induction
hob.
A cooling fan built into
your induction hob has
come on to prevent the
electronics from
overheating. It may
continue to run even
after you’ve turned the
induction hob off.
This is normal and needs no
action. Do not switch the power
to the induction hob off at the
wall while the fan is running.
Pans do not become
hot and appears in the
display.
The induction hob
cannot detect the
pan because it is not
suitable for induction
cooking.
The induction hob
cannot detect the pan
because it is too small for
the cooking zone or not
properly centerd on it.
Use cookware suitable for
induction cooking. See section
‘Choosing the right cookware’.
Center the pan and make sure
that its base matches the size of
the cooking zone.
The induction hob or a
cooking zone has turned
itself off unexpectedly,
a tone sounds and an
error code is displayed
(typically alternating
with one or two digits
in the cooking timer
display).
Technical fault. Please note down the error
letters and numbers, switch off
the power to the induction hob
at the wall, and contact a
qualified technician.
The induction hob or a
cooking zone has turned
itself off unexpectedly,
a tone sounds and an
error code is displayed
(typically alternating with
one or two digits in the
cooking timer display).
Technical fault. Please note down the error
letters and numbers, switch off
the power to the induction hob
at the wall, and contact a
qualified technician.