SCHOLTES MULTIPLO.1 F Скачать руководство пользователя страница 15

Страница: 15 / 72

The glue applied on the gaskets leaves traces of

grease on the glass. Before using the appliance, we
recommend you remove these with a special non-
abrasive cleaning product. During the first few hours
of use there may be a smell of rubber which will
disappear very quickly.
The appliance has 2 cooking zones and its various
functions are activated by touching the
corresponding

ontrols.

Each selection must be activated within 10 seconds,
otherwise the display will switch off again.

Switching on the hob

The hob is switched on by activating the

button.

Selecting the cooking zones

To select the desired cooking zone, press the cooking

mode selector button

; alternatively press

button

to select the single cooking zone.

Once the desired cooking zone has been selected, set

the desired power level using buttons

and

Switching off the cooking zones

Activate the

button; the power of the cooking

zone will progressively decrease until it is switched

off. Alternatively, activate the

and

buttons simultaneously; the power level will revert to
0 immediately and the cooking zone will switch off.

Single cooking zone operation

Switch on the hob. Press button

. Press buttons

and

to select the desired power level.

Once activated, press button

until reaching 0

to switch from the single cooking zone to separate
cooking zones. It will then be possible to select one
of the two separate cooking zones.

Programming the cooking duration

All the cooking zones may be programmed for a

length of time between 1 and 99 minutes.

1. Select the cooking zone using the corresponding

control.

2. Adjust the power level of the cooking zone.

3. Press the

programming button. The indicator

light corresponding to the selected zone will start
flashing.

4. Set the desired cooking duration using the

and

buttons.

5. Confirm by pressing the

button or automatic

selection occurs after 10 seconds. The indicator
light corresponding to the programmed cooking
zone will start flashing.

The timer begins counting down immediately. When
the programmed cooking duration has elapsed, a
buzzer sounds (for 1 minute) and the cooking zone
switches off. Repeat the procedure described above
for every hotplate you wish to programme.
The corresponding COOKING ZONE
PROGRAMMED INDICATOR LIGHT will switch on for
every cooking zone.
When both cooking zones have been programmed,
the display visualises the remaining time for the
cooking zone with lower duration and indicates the
position of the latter with the corresponding flashing
indicator light. The indicator light for the other
programmed zone emits a steady light.
To visualise the time remaining for the other

programmed hotplates, press the

button

repeatedly: the time remaining for
each hotplate will be shown
sequentially in a clockwise order,
starting from the front left hotplate.

Changing the programme

1. Press button

repeatedly until the display

visualises the hotplate time that must be modified.

2. Press buttons

and

to set the new time.

3. Confirm by pressing button

To cancel a programme, follow the above