GBA Z 0675 2 E
BA
Page 18 of 29
November 9, 2020
Last revised 11-2020
Rev. 2
Scho
ll Ap
parat
eb
au
G
mb
H &
C
o
.
KG
6
S
AFETY INSTRUCTIONS
6.1 R
ISK IN THE EVENT OF NON
-
OBSERVANCE OF THE SAFETY INFORMATION
Danger for persons, for the environment and for the induction unit as well as claims for damages of any
kind can result of non-observance of the safety information. Certain risks may be associated with non-
observance of precautions, including:
• Danger to persons through electrical causes
• Danger to persons through overheated SCHOLL GN
• Danger to persons through an overheated cooking platform (ceran plate)
6.2 S
AFETY CONSCIOUS WORK
The safety information pointed out in these instructions for use, the existing national regulation for the
prevention of accidents as well as any internal working, operating and safety regulation stipulated by the
operator must be observed at any time.
6.3 S
AFETY INFORMATION FOR THE OPERATOR
/
OPERATING PERSONNEL
Any risks from electric power must be eliminated. The heating area is warmed up from the heat of the bot-
tom of the SCHOLL GN equipment. To avoid injuries (burning) do not touch the heating area.
• Switch the control knob off if you take the SCHOLL GN equipment away for a while. This will avoid
the heat retention process to continue automatically when a serving pan is placed back on the heat-
ing area. So, if a person starts to use the induction unit, he/she will have to start the heating process
by turning the control knob in the ON-position.
• Do not place any piece of paper, cardboard, cloth, etc. between the SCHOLL GN equipment and the
heating area, as this might initiate a fire.
• As metallic objects are heated up very quickly when placed on the heating area, do not place any
other objects than the SCHOLL GN equipment (closed cans, aluminium foil, cutlery, jewelry, watches
etc.) on the heat retention field.
• Persons with a cardiac pacemaker should consult their doctor whether they are safe near an induc-
tion unit.
• Aluminium foil and plastic vessels must not be placed on the hot surface.
• The surface must not be used for storage.
• Do not place credit cards, phone cards, cassette tapes, or other objects sensitive to magnetism on
the ceran plate.
• The induction heat retention unit has an internal air-cooling system. Do not obstruct the air inlet-
and air outlet-slots with objects (cloth). This would cause overheating and therefore the unit would
switch off.
• Avoid liquid entering into the induction unit. Do not let water or food overflow the bac. Do not clean
the induction unit with a jet of water.
• If the heating area (ceran plate) is cracked or broken, the induction unit must be switched off and
disconnected from the electric connection. Do not touch any parts inside the unit.
