GBA Z 0681 2 E
BA
Page 16 of 28
November 9, 2020
Last revised 11-2020
Rev. 2
Scho
ll Ap
parat
eb
au
G
mb
H &
C
o
.
KG
5
O
PERATION
Heat retention process
The heat retention unit is immediately ready for operation. The shining display indicates that energy is
transferred to the bottom of the Chafing Dish or to the bottom of the Pan. The temperature rating is set by
turning the control knob.
Make sure to cover the pots or pans with a lid if fluids are kept warm.
Pots and pans must not be over 100°C when placed on the heat retention plate, this may lead to damages
of the glass, or to a safety cutoff.
5.1 C
OMFORT
The generator transmits energy only when a serving pan is placed on the heating area and a temperature is
chosen. If you take all bacs away from the heating area, the power transfer stops immediately. If they are
put back on the heating area, the power will be transferred again.
After switching the power switch to the OFF-position „ “, the heat retention process will stop. Heat is
only be stored in the pot or pan.
