GBA B 0014 1 E
BA
Page 12 of 24
April 7, 2021
Last revised 04-2021
Rev. 1
Scho
ll Ap
parat
eb
au
G
mb
H &
C
o
.
KG
4
I
NSTALLATION AND ELECTRICAL INSTALLATION
4.1 I
NSTALLATION
Before the installation of the appliance, observe the following:
Inspect the unit for any defect or damage sustained in transit.
Check all screw connections for tightness.
Familiarize yourself with the Instructions for Use and with the conditions for the safe operation of this
appliance.
Clean the heat lamp before the first use according to chapter “Cleaning and care”.
Practice:
Mount the heat lamp at a suitable location.
Check or adjust the tension of the coiled cord draft mechanism.
The traction can be adjusted at the draft mechanism:
Unscrew the canopy and carefully push it down.
Justify the traction so that the heat lamp is easily adjustable in height but
not pulled down by its self-weight.
For less traction, turn the red pointer to the left.
For more traction, turn the red pointer to the right.
Carefully push the canopy upwards and screw it on again.
