Schoeps ORTF-3D, Руководство по установке

Страница: 6 / 10

SCHOEPS ORTF-3D Windshield
with Rain Cover or Fur
Setup Guide
Page 6 of 10
6. Channel allocation
The following table shows the channel allocation. Note
that the setup
must hang for the right orientation of the
microphones!
The cable outlets of the windshield are marked with
“Top” and “Bottom” which corresponds to the two layers
of the ORTF-3D technique.
Channel Allocation of the ORTF-3D Setup
Channel # Labelling
on the cable outlet and the
Multicore breakout cable
Channel routing
only valid if small side
is front and
windshield is hanging
1 Bottom layer: Ch 1 (L) – Yellow L
2 Bottom layer: Ch 2 (R) – Red R
3 Bottom layer: Ch 3 (Ls) – Blue LS
4 Bottom layer: Ch 4 (Rs) – Green RS
5 Top layer: Ch 1 (L) – Yellow Lh
6 Top layer: Ch 2 (R) – Red Rh
7 Top layer: Ch 3 (LS) – Blue LSh
8 Top layer: Ch 4 (RS) – Green RSh
4ch Multicore breakout cable