20
8
Maintenance
8.1
Cleaning
•
Clean only with mineral spirits. Do
not
use nitro.
•
Clean dirty rails with a soft, lint-free cloth or fabric cloth. Do
not
use
compressed air!
8.2
Running the carriage on and off the rail
MONORAIL MR
To make sure that the rollers do not fall out of the carriages, run the carriage on
and off
only
with the mounting rail MRM!
The carriages are pushed onto the rails and form a unit together with the rail. To
maintain the required tolerances, do
not
interchange the carriages of different rails
with each other.
1.
Run the carriage onto a mounting rail.
2.
Leave the carriage on the mounting rail. Ensure that the carriage and the
matching rail are not mixed up.
3.
Run carriages individually from the mounting rail onto the associated rail.
When doing so, observe the following for carriages with metal wipers ASM:
–
Slightly undo the fastening screws of the metal wiper on the front plate.
–
Run the carriage onto the rails.
–
Ensure that the radial air gap between metal wipers and rail is even and
tighten the fastening screws again.