20
3.7 Memory functions
When saving measured values again, the existing values are overwritten
You can store and display the statistics of the last 128 measuring values (last measured
value, the average, the minimum and maximum measured values as well as the stan-
dard deviation). In addition, the measured values are displayed as a graph.
Save data
- When pressing the
button the display will freeze (The display shows MEM,
HOLD, Save with Damp, fig 3.7a).
- By pressing the
button the storage takes place (The display shows „MEM“,
fig. 3.7b) and the measurement is continued
while by pressing the
button the measurement is continued without saving.
Displaying the saved measured values
- Press the
and
buttons simultaneously to display the saved data.
The display will only show statistical values:
- Name of the material to be measured
- Last reading
- Average
- Max.
- Min.
- Standard deviation (Std dev)
Delete the saved measured values
If data is saved in the tension meter, the display shows “MEM”.
Delete data:
- Press the
and
buttons simultaneously.
- Then press the
button. The memory content is now deleted.
fig. 3.7a
fig. 3.7b
- By pressing the
button the saved data can be displayed as graph.
- Press the
button to exit the memory.
The stored data are also automatically deleted after the device is switched off.
