8
1 LED display
Displays function and value
2
LED EXT
External mode indicator
3
LED INT
Internal mode indicator
4
LED B-CH
Battery charge indicator (DT-315N only)
5
LED RPM
Flashes per minute indicator
6
LED deg
Phase shift indicator
7
LED mSec
Millisecond indicator
8
Signal switch
Switches the unit from the external mode to the internal mode
(and vice-versa).
9
Display mode switch
When unit is set to the external mode, the strobe will switch to
one of the three options each time “MODE” is pressed:
rpm
(FPM) Displays flashes per minute External
input 0 - 30000 rpm
deg
Displays flash delay in degrees
msec
Displays flash delay in msec
10
Setter
Changes the flashing rate, delayed angle and delayed time.
11
x2 Switch
In the internal mode, pressing “x2” doubles the flashing rate.
12
+ Switch
In the internal mode,
when object appears to be standing still,
pressing “+” will give the illusion that the object is moving
owards the rotating direction at a speed of 1 rotation in
6 seconds.
13
÷2 Switch
In the internal mode, pressing “÷2” divides the flashing rate
by two
14 - Switch
In the internal mode,
when object appears to be standing still,
ressing “-” will give the illusion that the object is moving in
reverse at a speed of 1 rotation in 6 seconds.
15 Input and Output Connector
PIN #1: +12 V (for powering sensor)
PIN #2: Sync output signal
PIN #3: External input signal
PIN #4: 0V (common)
16
Power cord
(DT-311N)
AC Adapter
(DT-315N)
17
Power switch
3.3 Operating Elements
