Schmidt
Mess- und Regeltechnik
©2021
Schmidt
Mess- und Regeltechnik
Fon 0 67 32 - 91 91 20 Fax 0 67 32 - 96 24 42
Operating Manual
Flow Limiter BA, BB, BC, BF
Mechanical flow limiter
B
-E
N
_
BA
-BB
-BC
-BF
-20211021
2
These instructions facilitate the safe and efficient handling of a flow limiter (referred to as "device" in
the following). The instructions are an integral part of the device and must be kept within easy reach for
the personnel in the immediate vicinity of the device at all times. Personnel must carefully read and
understand these instructions before commencing all work. The basic requirement for safe work is
adherence to all safety and handling instructions stipulated in these instructions. The local accident-
prevention regulations and general safety standards and regulations for the field of application of the
device also apply. Illustrations in these instructions are provided to aid general understanding and
might deviate from the actual model. No claims can be derived from any such differences.
Limitations of liability
All details and instructions in this manual have been compiled under consideration of the valid
standards and regulations, the current state-of-technology and our many years of knowledge and
experience. The manufacturer does not accept any liability arising from:
▪
non-observance of any details in these instructions
▪
improper use of the device, or use that is not in accordance with these instructions
▪
use of non-trained personnel
▪
unauthorized retrofitting or technical changes that have not been authorized by the manufacturer
▪
use of non-approved replacement parts
The duties and obligations agreed upon in the delivery contract apply in full, as well as the general
terms and conditions, the terms of delivery by the manufacturer and the valid legal regulations
applicable at the conclusion of the contract.
Copyright
These operating instructions are protected by copyright.
Except for internal purposes, transfer of these instructions to third-parties, copying them in any way
– even in part – as well as dissemination and/or communication of their content is forbidden without
prior written authorization from the manufacturer. Violations are subject to claims for indemnification.
The manufacturer reserves the right to assert additional claims.
Copyright is the property of the manufacturer
