manualshive.com logo in svg

Schmidt AS 990, Руководство по эксплуатации, Страница: 56 / 180

Поделиться
Скачать
Schmidt AS 990 Скачать руководство пользователя страница 56

 

 

 

Translation of Original Operating Instructions 
Airport Sweeper / Airport Stand Cleaner 

 

2017-02-02 56 

 

7.19.1.3 Closing 

the suction nozzle 

channel on the liquid pick-up 
unit between the axles 

 

The suction nozzle unit of the liquid pick-up unit 
between the axles is closed using a pneumatically 
activated shutter gate (1). It is controlled 
automatically. 

 

 

 

TIP 

The gate for the suction between the axles is 
closed automatically when the wanderhose 
is started. 

 

 

 

Gate positions: 

 

Liquid pick-up unit raised 

  Suction channel closed 

Liquid pick-up unit lowered 

  Suction channel open 

 

7.19.1.4  Opening and closing the 

locking plate on the suction 
hose 

In order for the vacuum created by the blower in the 
debris hopper to work within the suction hose, it must 
be connected to the debris hopper. The locking plate 
can be opened with the blower shut off to do this. 

 

Flap closed (1) 

  Wanderhose not in use 

Flap open (2) 

  Wanderhose can be put into operation. 

 

 

After using the wanderhose, the suction nozzle 
channels must be opened again and the locking 
plate on the suction hose must be closed.  
Deactivate the "Wanderhose" menu. 

 

 

 

NOTE

 

Before switching on, open the water pump ball 
valve (1) on the water filter 

 

 

 

NOTE

 

Damage to cleaning and water system 

►

 Completely empty both systems in case 

of a danger of frost 

 

 

1

1

2

11

Содержание AS 990





















































































































































































Отзывы:

Нет отзывов