Instructions for Use
– SCHMIDT
®
Flow Sensor SS 23.400 ATEX 3
Page 25
Transport / Shipment of the sensor
Before transport or shipment of the sensor, the delivered protec-
tive cap must be placed onto the sensor tip. Avoid soiling or me-
chanical stress.
Calibration
If the customer has made no other provisions, we recommend repeating
the calibration at a 12-month interval. To do so, the sensor must be sent
in to the manufacturer.
Spare parts or repair
No spare parts are available, since a repair is only possible at the manu-
facturer's facilities. In case of defects the sensors must be sent in to the
supplier for repair.
If the sensor is used in systems important for operation, we recommend
you to keep a replacement sensor in stock.
Test certificates and material certificates
Every new sensor is accompanied by a certificate of compliance according
to EN10204-2.1. Material certificates are not available.
Upon request, we shall prepare, at a charge, a factory calibration certifi-
cate, traceable to national standards.
9 Type examination certificate ATEX
The type examination certificate can be downloaded from homepage of
SCHMIDT Technology
:
!
