18
4. Design
1 Non-slip surface
2 Top electrode (steel plate)
3 Spacer
4 Electrode strips
5 Insulation
6 Bottom electrode (steel plate)
7 Tactile mat bottom
The tactile mat consists of elec-
trodes (steel plates) which are se-
parated from each other. These
are held apart using insulation
strips.
Electrode strips located between
the two steel plates cause an
electrical short circuit when the
pressure sensitive mat (tactile
mat) is actuated.
Fig. 2: Design of the tactile mat
3. Items provided
• Tactile mat incl. 6 m cable
• Mounting and wiring instructions
Safety module and active edge
profiles have to be ordered sepa-
rately.
Fig. 3: Function of the tactile mat
