3. Use a size 24 open-ended wrench to turn the ex-
tension (1) counterclockwise and remove it from
the clamping disc.
1
4. Screw the clamping disc clockwise onto the clamp.
5. Open the quick adjustment mechanism (see step 1
above).
6. For the next steps, see section “Setting the Clamp-
ing Height, steps 2–4”.
7 Start of Operations
7.1 Clamping the Workpiece
CAUTION
When the clamping disc is lowered, body parts may be present in the clamping range
Crushing of body parts
4
Ensure that the clamping height is set so that the distance between the clamping disc and the
workpiece is less than or equal to 6 mm.
4
Do not reach into the clamping range while the clamping disc is being vacuum-lowered.
WARNING
Flying workpiece due to insufficient clamping force during processing resulting from incor-
rect setting of the clamping height.
Risk of injury due to flying workpiece
4
Adjust the clamping height such that the VCMC uses its maximum clamping force. While doing
so, ensure that the lifting force of the VCMC is less than or equal to 6 mm.
4
Personal protective clothing must be worn.
12 / 14
EN-US · 30.30.01.03007 · 00 · 10/21
