2.
Releasing the catch of the quick adjustment mech-
anism:
Clasp the clamping disc with both hands
and press and hold the locking disc down by about
4 mm.
ð
This releases the quick-locking mechanism.
3.
CAUTION! When the clamping disc is adjusted
downward, there is the risk of crushing fingertips
in the area shown.
Adjust the clamping height as necessary and then
release the locking disc. Ensure that the distance
between the clamping disc and the workpiece is
less than or equal to 6 mm.
The adjustments can be made in steps of 5 mm.
ð
The clamping disc is adjusted to the necessary
clamping height.
ð
The quick adjustment mechanism is locked.
4.
Closing the quick adjustment mechanism:
Turn the
locking disc clockwise as far as possible and tighten
(hand-tight) to close the quick adjustment mecha-
nism.
ð
The system is free of play.
ð
The clamping height is set.
ð
The VCMC is ready for use.
10 / 14
EN-US · 30.30.01.03007 · 00 · 10/21
