Schmalz FMHD, Инструкция по эксплуатации

Страница: 9 / 60

30.30.01.01648/06 www.schmalz.com EN | 9
Product Key
Schmalz will be happy to advise you on selecting a gripper in order to be able to offer the best solution
for your application.
The product key for configurable vacuum area grippers is made up as follows:
Example:
FMHD CV1 840 2R28 O20 C155L P A60F 126 V1 CA1
1 2 3 4 5 6 7 8 9 10 11
The product key for flat suction cups with a special width (e.g. 250 mm) also contains the value for the
width. Other special functions are not described in detail for the sake of clarity. We are available to an-
swer any questions.
Example:
FMHD CV1 840 250 2R28 O20 C155L P A60F 126 V1 CA1
1 2 3 12
1
4 5 6 7 8 9 10 11
Field Meaning Available designs Value in example
1 Gripper type FMHD FMHD
2 Check valve CV1, CV2 (automatic assignment) Standard version
3
Length “L”
From 350 mm to 3500mm
(14 mm grid)
840 mm
4 Grid 2R28, 3R22, special grid 2R28
5 Foam type
Foam type specification
–
depending on the application
O20
6
Cylinder position “L3”
Measured from the left side of the
enclosure to the center of the
mounting plate
Left; 155 mm
7 Plate PNP/ for impulse valve PNP
8 Nozzle
Straight, angled, open,
Cover plate Angle = angled; Ø 60 mm,
“Front” alignment
9
Nozzle position “L2”
Variable 126 mm
10 Vacuum display
Gauge, VSi, …
Gauge
11
Compressed air
connection Plug-in nipple 7.2,
Plug-in screw union
Plug-in nipple 7.2
12 Width
Standard width 170 mm/special
widths
1
250 mm
1
The width is only specified for vacuum area grippers which are not built in the standard width of 170 mm.
2
From a gripper length of 2,506 mm, two separating cylinders are used, the position is fixed.