Rapid
16
module clamps
InstallatIon guIde
© SCHLETTER SOLAR GMBH | I400339 | V0 | 07/2018 | We reserve the right to changes.
3 | 8
VeRtICal InstallatIon
PRoFIle aRRangeMent
Check whether the arrangement of the module bearing profile corresponds to
your module configuration.
observe the clamping points in the manufacturer data.
InstallIng tHe FIRst Module
Insert end clamps at least 10 mm from the end of the profile.
1
2
•
Place the module on the profile ends
•
align the module
•
Click in the 2 Rapid
16
end clamps and tighten the screws (tX drive t40).
•
Connect the module cable accordingly.
