Enrollment
1. Hold the bridge within 6 feet (1.8 meters) of the dimmer module
throughout all of step 7.
2. Install a fresh 9-volt battery into the bridge.
3. Press and release the plus (+) button on the bridge.
4. Double-click the button on the dimmer module.
5. Observe the lights on the bridge. The orange light will blink while
enrollment is taking place. Enrollment is complete when the orange
light becomes solid.
6. Reconnect power and Ethernet to the bridge.
-
+
Manual Operation
•
Press the button once to turn the light on or off.
•
Press and hold the button to dim.
•
Use the web portal or phone application for remote control.
•
The phone application can be downloaded from
www.mynexia.com, after your account is set up.
•
The pass-through outlet (1500 watts maximum) is not controlled by
the system, and the system is not affected when it is used.
Click or
Hold
Z-Wave™
Side
Pass-through
Side
Within 6’
(1.8 m)
Remote Control
•
Log into your account at www.mynexia.com. Click the Lighting &
Automation tab. The dimmer module will be displayed.
•
Download the phone application from www.mynexia.com.
mynexia.com
-
+
Click
Double-Click
