3
Lock Installation
1
Prepare for installation.
1a Determine proper magnet orientation.
Locks should be installed with wiring covers in the middle, so the magnet in one of the locks must be reoriented.
Shown from Exterior
Magnet
Magnet
Wiring Covers
1b Reorient magnet (if necessary).
a. Remove screws, wiring cover and end blocks.
Magnet
End Block
(with screw holes)
End Block
b. Rotate magnet, end blocks and wiring cover as shown, then reassemble.
End Block
(with screw holes)
Wiring Cover
Magnet
Assembled
Magnet
