3. ASSEMBLE
LEVER/KNOB
Insert lever retaining
plate cog into
knob-catch slot on the
knob shank. Snap
retainer plate into
place. Complete
installation of retainer
plate with provided
screws. Screw down
completely so that
screws are flush with
retainer plate.
4. REPLACE
KNOB/LEVER
Slide the assembled
retrofit lever & knob on
spindle. Depress knob
catch, exert pressure,
turn key slowly and
push lever assembly
into position. Pull knob
to test fastening of
catch. Test lock for
operation.
For additional information see Service Manual 50-100.
RETAINING PLATE
COG
SCREWS
push
SPINDLE
KNOB CATCH SLOT
KNOB CATCH
LINE UP LUG IN KNOB SHANK WITH SLOT IN SPINDLE.
©2010 Schlage Lock Company
800-847-1864
Printed in Country
P509-464 Rev. 07/10-b
