Schiller Steiner 75-71234A, Руководство по сборке

Страница: 6 / 14

4
ASSEMBLY/SET-UP INSTRUCTIONS
3. Assemble the lever( Item 2) and the arm (Item 3)
with one 1/4" X 3/4" hex bolt (Item 24) and one
1/4" nylon-insert locknut (Item 29).
DO NOT TIGHTEN COMPLETELY so the deflector
moves freely.
8. Insert three 5/16" washers (Item 31) and the
bracket (Item 1) on the bolts installed in Step 3.
9. Insert the gasket (Item 9) and the electric motor
(Item 7) on the bolts also.
10. Secure the assembly with three 1/4" nylon-insert
locknuts (Item 27).
Make sure the gasket is properly positioned on the
motor.
4. Insert three 1/4" X 2 hex bolts (Item 23) into the
Ø9/32" hole drilled inthe chute. Insert three 5/16"
flat washers (Item 31).
5. Insert two spacers (Item 10) on the two back
bolts.
6. Insert oil lite bushing (Item 15) on the front bolt.
7. Insert the lever assembly (Item A) on the oil lite
bushing (Item 15).