background image

1

Lawnaire

IV 

with

 EST

07-2013

IMPORTANT MESSAGE

Thank you for purchasing this Schiller Grounds Care, Inc. product.  You have purchased a world class product, 

one of the best designed and built anywhere.  

This machine comes with a Technical Manual containing safety, operation, parts, maintenance and service 

information. The useful life and good service you receive from this machine depends to a large extent on how 

well you read and understand this manual. Treat your machine properly, lubricate and adjust it as instructed, 

and it will give you many years of reliable service.

Your safe use of this Schiller Grounds Care, Inc. product is one of our prime design objectives.  Many safety 

features are built in, but we also rely on your good sense and care to achieve accident-free operation.  For best 

protection, study the manual thoroughly. Learn the proper operation of all controls. Observe all safety precau-

tions. Follow all instructions and warnings completely.  Do not remove or defeat any safety features.  Make sure 

those who operate this machine are as well informed and careful in its use as you are. 

See a Schiller Grounds Care, Inc. dealer for any service or parts needed.  Schiller Grounds Care, Inc. service 

ensures that you continue to receive  the best results possible from Schiller Grounds Care, Inc. products.  You 

can trust Schiller Grounds Care, Inc. replacement parts because they are manufactured with the same high 

precision and quality as the original parts.  

Schiller Grounds Care, Inc. designs and builds its equipment to serve many years in a safe and productive man-

ner.  For longest life, use this machine only as directed in the manual, keep it in good repair and follow safety 

warnings and instructions.  You'll always be glad you did. 

Schiller Grounds Care, Inc.

One Bob Cat Lane

Johnson Creek, WI   53038-0469

TABLE OF CONTENTS                           FIGURES .......................................              PAGE

SAFETY .........................................................................................................................................................2-6

SAFETY AND OPERATION DECALS ..............................................................................................................7

ASSEMBLY/SET-UP INSTRUCTIONS ........................................................................................................8, 9

CONTROLS .............................................................................................................................................. 10, 11

OPERATION ...................................................................................................................................................12

MAINTENANCE/ADJUSTMENTS ..................................................................................................................13

TRANSPORTING ...........................................................................................................................................14

STORAGE ......................................................................................................................................................15

SPECIFICATIONS ..........................................................................................................................................16

PARTS SECTION ...........................................................................................................................................17

FRAME GROUP .......................................................FIGURE 1 ...............................................................18, 19

MAIN GROUP-LAWNAIRE IV ..................................FIGURE 2 ...............................................................20, 21

HANDLE GROUP .....................................................FIGURE 3 ...............................................................22, 23

TINE WHEEL GROUP ..............................................FIGURE 4 ...............................................................24, 25

DRUM GROUP .........................................................FIGURE 5 ...............................................................26, 27

DECAL GROUP........................................................FIGURE6 ................................................................28, 29

Содержание RYAN LAWNAIRE IV

































Отзывы: