Schiller BOBCAT XRZ FR651V KAW Скачать руководство пользователя страница 4

Страница: 4 / 66

XRZ

SAFETY

NOTICE !!!

Unauthorized modifications may present

extreme

safety hazards to operators and bystanders and

could also result in product damage.

Schiller Grounds Care, Inc. strongly warns against,

rejects and disclaims any modifications, add-on

accessories or product alterations that are not

designed, developed, tested and approved by Schiller

Grounds Care, Inc. Engineering Department. Any

Schiller Grounds Care, Inc. product that is altered,

modified or changed in any manner not specifically

authorized after original manufacture–including the

addition of “aftermarket” accessories or component

parts not specifically approved by Schiller Grounds

Care, Inc. will result in the Schiller Grounds Care,

Inc. Warranty being voided.

Any and all liability for personal injury and/or property

damage caused by any unauthorized modifications,

add-on accessories or products not approved by

Schiller Grounds Care, Inc. will be considered

the responsibility of the individual(s) or company

designing and/or making such changes. Schiller

Grounds Care, Inc. will vigorously pursue full

indemnification and costs from any party responsible

for such unauthorized post-manufacture modifications

and/or accessories should personal injury and/or

property damage result.

MODEL NUMBER:

This number appears on

sales literature, technical manuals and price lists.

SERIAL NUMBER:

This number appears only

on your mower. It contains the model number

followed consecutively by the serial number.

Use this number when ordering parts or seeking

warranty information.

This symbol means:

ATTENTION!

BECOME ALERT!

Your safety and the safety of others is involved.

Signal word definitions

The signal words below are used to identify levels

of hazard seriousness. These words appear in this

manual and on the safety labels attached to Schiller

Grounds Care, Inc.machines. For your safety and

the safety of others, read and follow the information

given with these signal words and/or the symbol

shown above.

DANGER

indicates an imminently hazardous

situation which, if not avoided,

WILL

result in death

or serious injury.

WARNING

indicates a potentially hazardous

situation which, if not avoided,

COULD

result in

death or serious injury.

CAUTION

indicates a potentially hazardous situation

which, if not avoided,

MAY

result in minor or moderate

injury. It may also be used to alert against unsafe

practices or property damage.

CAUTION

used without the safety alert symbol

indicates a potentially hazardous situation which, if

not avoided,

MAY

result in property damage

* Serial Plate located on left side panel near cut-off switch.

Содержание BOBCAT XRZ FR651V KAW



































































Результаты поиска

Содержание BOBCAT XRZ FR651V KAW

Отзывы:

Похожие инструкции для BOBCAT XRZ FR651V KAW

Бренды по названию

Популярные бренды

Schiller BOBCAT XRZ FR651V KAW, Руководство оператора

Результаты поиска

Содержание BOBCAT XRZ FR651V KAW

Отзывы:

Похожие инструкции для BOBCAT XRZ FR651V KAW

Бренды по названию

Популярные бренды