Schiller ARGUS VCM, Руководство по обслуживанию

Страница: 21 / 78

Performance Verification
ARGUS VCM
Pulse Tone Volume Control
1. Connect the monitor to an AC power source.
2. Press Power button to turn the monitor on.
3. Connect SpO
2
simulator to the pulse oximetry cable and connect the cable to the
monitor.
4. Set SpO
2
simulator as follows: SpO
2
of 90% and pulse rate of 60 bpm.
5. Verify SpO
2/
pulse rate values and pulse amplitude indicator correctly display, and
pulse tone sounds.
6. Press the mode button to enter setting mode.
7. Press Up (+) selection button to adjust pulse tone volume from 1 to 8. Return to the
monitoring screen.
8. Verify beeping pulse tone increases.
9. Press the mode button to enter setting mode.
10. Press Down (-) selection button to adjust pulse tone volume from 8 to 1. Return to
the monitoring screen.
11. Verify beeping pulse tone decreases.
12. Set pulse tone volume to 0, and return to the monitoring screen. Verify pulse tone is
no longer audible.
13. Return pulse tone volume to a comfortable level.
Alarm Volume Control
1. Connect the monitor to an AC power source.
2. Press Power button to turn the monitor on.
3. Kink NIBP cuff hose connector of the monitor and then press NIBP start/stop button.
4. Verify that the monitor ‘E23’ displays and sounds audible alarm.
5. Press the mode button to enter setting mode.
6. Press Up (+) selection button to adjust alarm volume from 1 to 8. Return to the
monitoring screen.
7. Verify alarm tone increases.
8. Press the mode button to enter setting mode.
9. Press Down (-) selection button to adjust alarm volume from 8 to 1. Return to the
monitoring screen.
10. Verify alarm tone decreases.
11. Return alarm volume to a comfortable level.
Real-Time Clock
1. Connect the monitor to an AC power source.
2. Press Power button to turn the monitor on.
3. Verify that Time display updates every second.
16
ARGUS VCM
Service Manual